Player FM - Internet Radio Done Right
71 subscribers
Checked 19h ago
הוסף לפני eight שנים
תוכן מסופק על ידי Adafruit Industries. כל תוכן הפודקאסטים כולל פרקים, גרפיקה ותיאורי פודקאסטים מועלים ומסופקים ישירות על ידי Adafruit Industries או שותף פלטפורמת הפודקאסט שלהם. אם אתה מאמין שמישהו משתמש ביצירה שלך המוגנת בזכויות יוצרים ללא רשותך, אתה יכול לעקוב אחר התהליך המתואר כאן https://he.player.fm/legal.
Player FM - אפליקציית פודקאסט
התחל במצב לא מקוון עם האפליקציה Player FM !
התחל במצב לא מקוון עם האפליקציה Player FM !
#NewProducts 12/18/24 Feat @Adafruit 1.14" 240x135 Color Newxie TFT Display - ST7789
Manage episode 457727212 series 1242341
תוכן מסופק על ידי Adafruit Industries. כל תוכן הפודקאסטים כולל פרקים, גרפיקה ותיאורי פודקאסטים מועלים ומסופקים ישירות על ידי Adafruit Industries או שותף פלטפורמת הפודקאסט שלהם. אם אתה מאמין שמישהו משתמש ביצירה שלך המוגנת בזכויות יוצרים ללא רשותך, אתה יכול לעקוב אחר התהליך המתואר כאן https://he.player.fm/legal.
Round Panel Mount Micro SD Card Extender (0:17) https://www.adafruit.com/product/6070 USB-C Screw Panel Mount to 4pin JST PH Cable (2:11) https://www.adafruit.com/product/6071 Snap-In Panel Mount Cable - USB-A Socket to 2 Wires (3:27) https://www.adafruit.com/product/6072 Snap-In Panel Mount Cable - USB Type A Socket to 4 Wires (3:49) https://www.adafruit.com/product/6073 Sewable USB Type C Power Jack Connector (4:03) https://www.adafruit.com/product/6077 Sewable Connector with 5.5/2.1mm DC Jack (4:55) https://www.adafruit.com/product/6075 Sewable USB Micro B Power Jack Connector (5:07) https://www.adafruit.com/product/6076 Adafruit 1.14" 240x135 Color Newxie TFT Display - ST7789 (5:51) https://www.adafruit.com/product/6113 ----------------------------------------- New nEw NEWs New Products, News, and more: https://www.adafruit.com/newsletter #newnewnew Shop for all of the newest Adafruit products: http://adafru.it/new Visit the Adafruit shop online - http://www.adafruit.com Adafruit on Instagram: https://www.instagram.com/adafruit LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------
…
continue reading
4533 פרקים
Manage episode 457727212 series 1242341
תוכן מסופק על ידי Adafruit Industries. כל תוכן הפודקאסטים כולל פרקים, גרפיקה ותיאורי פודקאסטים מועלים ומסופקים ישירות על ידי Adafruit Industries או שותף פלטפורמת הפודקאסט שלהם. אם אתה מאמין שמישהו משתמש ביצירה שלך המוגנת בזכויות יוצרים ללא רשותך, אתה יכול לעקוב אחר התהליך המתואר כאן https://he.player.fm/legal.
Round Panel Mount Micro SD Card Extender (0:17) https://www.adafruit.com/product/6070 USB-C Screw Panel Mount to 4pin JST PH Cable (2:11) https://www.adafruit.com/product/6071 Snap-In Panel Mount Cable - USB-A Socket to 2 Wires (3:27) https://www.adafruit.com/product/6072 Snap-In Panel Mount Cable - USB Type A Socket to 4 Wires (3:49) https://www.adafruit.com/product/6073 Sewable USB Type C Power Jack Connector (4:03) https://www.adafruit.com/product/6077 Sewable Connector with 5.5/2.1mm DC Jack (4:55) https://www.adafruit.com/product/6075 Sewable USB Micro B Power Jack Connector (5:07) https://www.adafruit.com/product/6076 Adafruit 1.14" 240x135 Color Newxie TFT Display - ST7789 (5:51) https://www.adafruit.com/product/6113 ----------------------------------------- New nEw NEWs New Products, News, and more: https://www.adafruit.com/newsletter #newnewnew Shop for all of the newest Adafruit products: http://adafru.it/new Visit the Adafruit shop online - http://www.adafruit.com Adafruit on Instagram: https://www.instagram.com/adafruit LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------
…
continue reading
4533 פרקים
Minden epizód
×3D Printing in 2024! Here are just some of the 3d printing projects @adafruit during 2024 with @ecken and @videopixil Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting -----------------------------------------…
We're rounding the corner with testing our Sparkle Motion (https://www.adafruit.com/product/6100) WLED-compatible board. This time, we're doing the fuse test. we got a lot of requests to include a 5A fuse onboard. Of course, we need to verify that it works as expected. With a chonky 12V 25A power supply and my trusty electronic load, we dial up one amp at a time... note that all PTC fuses have a 'hold' of 5A and a higher trip current of ~2x that, so we actually open at 10A. Once it heats up a bit, that trip current can drop a bit, but it will always be over 5A and under 10A. Good test equipment makes this job nice and easy. The board is complete - time to book it up, just in time for the New Year. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ ----------------------------------------- #wled #led #art…
This chonky neopixel tube is a treat with full, smooth color all the way around - but it's also a real pain to drive, given it requires 24V power. Or at least it would be if we didn't have this Sparkle Motion (https://www.adafruit.com/product/6100) board we are testing! With USB PD support, it's easy to plug the board into a USB C laptop power supply that can provide 20V at up to 5A - even though it's under 24V, we've found the LEDs are just as bright. Looks great, we're going to keep testing and get these boards ordered, hopefully before the year's end! Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ ----------------------------------------- #wled #led #art…
We're rounding the corner with testing our Sparkle Motion (https://www.adafruit.com/product/6100) WLED-compatible board. We're doing the audio-reactive test with the built-in I2S microphone this time. This digital mic will give great audio quality without needing any extra work. If you want an external mic wired far away, there are GPIOs exposed that you can solder to for another I2S connection - ESP32 lets you use any pins, which is nice! this demo is a graphical equalizer that makes verification easy! All we have left is to test the IR remote and fuse, and we're good to go! Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ ----------------------------------------- #wled #music #sound…
Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: Clamp Cable Holder By M8ker https://makerworld.com/en/models/755188 Bambu X1C Glitter Blue PLA 1hr 47mins X:90 Y:83 Z:60mm .2mm layer / .4mm Nozzle 6% Infill / 1mm Retraction 200C / 60C 35g 230mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting -----------------------------------------…
aaannnddd they are cuttable-cut-to-size ✂️ The nOOds we've been stocking in the adafruit shop (https://www.adafruit.com/search?q=noods) have been 'power through' type - positive at one end, negative on the other. We've had some requests for nOOds that can be powered from just one end, especially for decorative purposes, and here are some samples we're checking out! These nOOds use an FPC with two solderable/clippable contacts at a single end, and the other end has a melted-off end. The downside is that they are a bit brighter at the head than the tail, but it's not too bad. #noods #singleended #ledstrips Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------…
Learn how to create a magical light-up dreidel using an induction coil and LEDs in this step-by-step tutorial. Perfect for Hanukkah DIY projects, this dreidel lights up as it spins—no batteries required! Whether you’re into electronics projects, holiday crafts, or just love making fun, interactive toys, this project is a must-try. In this video, we’ll guide you through: ✨ Assembling the induction coil circuit ✨ Installing the LEDs in the dreidel ✨ Tips and tricks for getting the perfect spin ✨ The science behind the magic This project is beginner-friendly and uses components available at Adafruit. 🔗 Get the full tutorial with detailed instructions here: https://learn.adafruit.com/magical-light-up-dreidel/overview 🎉 Celebrate Hanukkah in style with this fun, hands-on STEM activity! Share your creations and tag us—don’t forget to like, comment, and subscribe for more amazing tutorials and creative projects. LED dreidel, induction coil project, Hanukkah DIY, light-up dreidel, electronics tutorial, Adafruit tutorial, STEM project, holiday crafts, LED toy, spinning dreidel, no batteries required, beginner electronics project, Hanukkah STEM activity. #DIY #Hanukkah #Adafruit #ElectronicsTutorial #STEMVisit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------…
Playing with our new Sparkle Motion board that's coming soon (https://www.adafruit.com/product/6100) we wanted to try driving a large display of LEDs and discovered that once you want to do custom display graphics, WLED is not super great. Instead, you can use the open source and free xLights software (https://xlights.org/) which is completely amazing and has a learning curve like a cliff for the first 30 minutes. BUT once you get your controller and layout, it's unbelievably powerful and actually kinda easy to get going with simple display work. It also has a very satisfying preview mode. #wled #led #neopixel Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------…
Since the latest release of 'piolib' we can do things like drive NeoPixels on any pin on the Raspberry Pi 5 (https://learn.adafruit.com/circuitpython-on-raspberrypi-linux/using-neopixels-on-the-pi-5) which rocks, and means we can tackle the next, more complex, project: driving HUB75 RGB Matrix displays (https://www.adafruit.com/product/5362) these require even MORE timing freakiness: using 10 pins, and 'manual' PWM means we have to constantly blit out the color dithering. Historically this was done with mmap'd memory to the GPIO controller bitbanging, which required a full core and could jitter depending on load. But now we can use the PIO peripheral! We can drive massive display arrays at high speeds and color depths using just about any pins. The future is looking bright 😎 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ ----------------------------------------- #adafruit #raspberrypi #pio…
We got our WLED-friend PCBs today, and we only made one mistake: the wrong resistor on the 3.3V feedback line. Now that it's fixed, the board seems to work great with the latest version of WLED (https://kno.wled.ge/basics/tutorials/)! we are checking all 4 signal outputs with this handy 256-LED grid that sits on our desk. Next, we will test the onboard IR receiver, USB PD, I2S microphone, extra I/O pins, and I2C. We'll also do an Arduino IDE board definition in case folks want to use it as a generic ESP32-to-LED-driver board. We're calling the board "Sparkle Motion" for now, but if you have other naming ideas, let us know - if we pick your name, you get a free board (https://www.adafruit.com/product/6100). Sign up, coming soon. Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ ----------------------------------------- #wled #ledscreen #electronics…
We got our WLED-friend PCBs (https://blog.adafruit.com/2024/12/02/leftovers-layout-wled-board-revision-a-completed/) and are testing it with various LED grids. First, we tried out a 16x16 NeoPixel grid that runs on 5V. Since that worked well, we're now onto a much bigger 60 x 60 grid - that's 3,600 LEDs! These are some NeoPixel pebble (https://www.adafruit.com/product/6024) netting samples we're also testing at the same time; each one has 20 x 60 pixels and uses 12V power, so it's a good test of the DC pass-through for higher voltages. Since WLED has a limit of 2000 pixels per output, this demo uses the three output ports that are then 'merged' together in memory to make a single large grid. We have more to test soon: the onboard IR receiver, USB PD, I2S microphone, extra I/O pins, and I2C, so watch for those videos as they come together. Coming soon - https://www.adafruit.com/product/6100 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ ----------------------------------------- #wled #neopixels #ledart…
Build a custom controller to trigger a smart outlet using a Feather ESP32-S2, CircuitPython, Adafruit IO and the itsaSNAP app for iOS. Tutorial, Files and Code https://learn.adafruit.com/holiday-iot-switch Feather ESP32-S2 https://www.adafruit.com/product/5000 Big Arcade Button https://www.adafruit.com/product/1187 Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------…
Every week we'll 3D print designs from the community and showcase slicer settings, use cases and of course, Time-lapses! This Week: Big Dreidel By Noe Ruiz printables.com/model/1118598-big-dreidel Bambu X1C Glitter Blue PLA 8hr 32mins X:150 Y:150 Z:200mm .2mm layer / .4mm Nozzle 6% Infill / 1mm Retraction 200C / 60C 400g 230mm/s ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Adafruit on Instagram: https://www.instagram.com/adafruit Shop for parts to build your own DIY projects http://adafru.it/3dprinting 3D Printing Projects Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOWD2dJNRIN46uhMCWvNOlbG 3D Hangout Show Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVgpmWevin2slopw_A3-A8Y Layer by Layer CAD Tutorials Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVsMp6nKnpjsXSQ45nxfORb Timelapse Tuesday Playlist: https://www.youtube.com/playlist?list=PLjF7R1fz_OOVagy3CktXsAAs4b153xpp_ Connect with Noe and Pedro on Social Media: Noe's Twitter / Instagram: @ecken Pedro's Twitter / Instagram: @videopixil ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Subscribe to Adafruit on YouTube: http://adafru.it/subscribe Adafruit Monthly Deals & FREE Specials https://www.adafruit.com/free?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting Join our weekly Show & Tell on G+ Hangouts On Air: http://adafru.it/showtell Watch our latest project videos: http://adafru.it/latest?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting 3DThursday Posts: https://blog.adafruit.com/category/3d-printing?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting New tutorials on the Adafruit Learning System: http://learn.adafruit.com/?utm_source=youtube&utm_medium=videodescrip&utm_campaign=3dprinting -----------------------------------------…
As we organize our new office room, we're looking for good storage solutions for the thousands of components and dev boards we have lying around. We have a mix of small through-hole parts like resistors, LEDs, and switches as well as some small dev boards like QT Py and breakout sensors. Let's see what DigiKey has for our component storage needs, such as a pull-out drawer solution. See the chosen part on DigiKey https://www.digikey.com/short/0nzd28hz ----------------------------------------- Visit the Adafruit shop online - http://www.adafruit.com LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/…
CircuitPython Wiz Library: https://github.com/adafruit/Adafruit_CircuitPython_Wiz Visit the Adafruit shop online - http://www.adafruit.com ----------------------------------------- LIVE CHAT IS HERE! http://adafru.it/discord Subscribe to Adafruit on YouTube: http://adafru.it/subscribe New tutorials on the Adafruit Learning System: http://learn.adafruit.com/ -----------------------------------------…
ברוכים הבאים אל Player FM!
Player FM סורק את האינטרנט עבור פודקאסטים באיכות גבוהה בשבילכם כדי שתהנו מהם כרגע. זה יישום הפודקאסט הטוב ביותר והוא עובד על אנדרואיד, iPhone ואינטרנט. הירשמו לסנכרון מנויים במכשירים שונים.